Introduction

This guide outlines the steps to disassemble the Q Global to access the internal speakers. It can be used to replace or repair a damaged speaker.

Pièces

Aucune pièce nécessaire.

  1. Turn the phone face down.
    • Turn the phone face down.

    • Press and hold the release button in the middle of the back panel.

    • Slide the bottom panel down to remove.

    Ajouter un commentaire

  2. Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.
    • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

    • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

    Ajouter un commentaire

    • Press inwardly on the upper casing until it pops out of the phone.

    Ajouter un commentaire

    • Slide the upper case rightward and lift up.

    • Lift the camera sticker so that it does not get damaged.

    Ajouter un commentaire

    • Remove the six labeled screws with a T5 torx screw driver.

    Ajouter un commentaire

    • Once the screws are removed, use the plastic opening tool to remove the black casing.

    Ajouter un commentaire

    • Remove the speakers by using the plastic remover tool.

    Ajouter un commentaire

    • Insert the new speakers by gently pressing them down into place.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Carlos De La Parra

Membre depuis le 05/10/2012

14 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 6-31, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 540