Aller au contenu principal

Introduction

This guide outlines the steps to disassemble the Q Global to access the internal speakers. It can be used to replace or repair a damaged speaker.

Pièces

Aucune pièce spécifiée.

  1. Turn the phone face down.
    • Turn the phone face down.

    • Press and hold the release button in the middle of the back panel.

    • Slide the bottom panel down to remove.

  2. Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown. When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.
    • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

    • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

  3. Press inwardly on the upper casing until it pops out of the phone.
    • Press inwardly on the upper casing until it pops out of the phone.

  4. Slide the upper case rightward and lift up.
    • Slide the upper case rightward and lift up.

    • Lift the camera sticker so that it does not get damaged.

  5. Remove the six labeled screws with a T5 torx screw driver. Remove the six labeled screws with a T5 torx screw driver.
    • Remove the six labeled screws with a T5 torx screw driver.

  6. Once the screws are removed, use the plastic opening tool to remove the black casing.
    • Once the screws are removed, use the plastic opening tool to remove the black casing.

  7. Remove the speakers by using the plastic remover tool.
    • Remove the speakers by using the plastic remover tool.

  8. Insert the new speakers by gently pressing them down into place.
    • Insert the new speakers by gently pressing them down into place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Carlos De La Parra

Membre depuis le 05/10/2012

14 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 6-31, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 549