Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the back cover by pressing down the silver button.
-
Pull the cover away from the phone.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the battery by pushing down on the top and pulling it away from the phone.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the two 5mm T6 Torx screws form the phone.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pry open the back of the phone using the spudger. There are four clips, one on the left, one on the right, and two on the bottom of the phone.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using tweezers, disconnect the copper ribbon on the left side of the phone by pulling it up from the circuit board.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the antenna by pushing in the tabs on the sides with the spudger, and pulling it out.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.