Aller au contenu principal

Introduction

This guide will show you how to remove and replace the speaker for a Motorola V3c.

Pièces

Aucune pièce spécifiée.

  1. Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c. Lift and remove the rear panel away from the V3c. Lift and remove the rear panel away from the V3c.
    • Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.

    • Lift and remove the rear panel away from the V3c.

  2. Remove the battery by pushing in the top of the battery and lifting it away from the phone. Remove the battery by pushing in the top of the battery and lifting it away from the phone.
    • Remove the battery by pushing in the top of the battery and lifting it away from the phone.

  3. Unscrew the two screws in the back using the T6.
    • Unscrew the two screws in the back using the T6.

  4. Kits pour Apple Watch

    Réparer l'écran et la batterie n'a jamais été aussi facile.

    Acheter maintenant

    Kits pour Apple Watch

    Réparer l'écran et la batterie n'a jamais été aussi facile.

    Acheter maintenant
  5. Use the plastic opening tool to pop the bottom and the sides off the back casing.
    • Use the plastic opening tool to pop the bottom and the sides off the back casing.

    • Be careful not to pull the back lower cover off too far as it is connected to the phone body by a ribbon.

  6. Peel off the connector between the motherboard and the body of the phone.
    • Peel off the connector between the motherboard and the body of the phone.

  7. Pull out the two black rubber covers using tweezers. The second rubber cover is much harder to get out.
    • Pull out the two black rubber covers using tweezers.

    • The second rubber cover is much harder to get out.

  8. Pull out the white plastic cover by unclipping the two plastic pieces shown. Pull out the white plastic cover by unclipping the two plastic pieces shown.
    • Pull out the white plastic cover by unclipping the two plastic pieces shown.

  9. Pull out the speaker.
    • Pull out the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joshua Ruehlig

Membre depuis le 14/01/2010

503 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 11-4, Forte Winter 2010 Membre de l'équipe Cal Poly, Team 11-4, Forte Winter 2010

CPSU-FORTE-W10S11G4

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 5,287