1. Push down on the black tab located at the top center of the Motorola phone
    • Push down on the black tab located at the top center of the Motorola phone

    Ajouter un commentaire

  2. Remove the battery by pulling the battery from the top center.
    • Remove the battery by pulling the battery from the top center.

    Ajouter un commentaire

    • Remove the four T6 2 mm TX Torx screws

    Ajouter un commentaire

  3. Livraison gratuite pour les commandes de plus de 20 $
    Indiquez le code BLUEANDBLACK au moment de payer
    Livraison gratuite pour les commandes de plus de 20 $
    Indiquez le code BLUEANDBLACK
    • Insert the flat end of a plastic opening tool and pry the metal cover up off the phone.

    Ajouter un commentaire

    • Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a plastic opening tool.

    Ajouter un commentaire

    • Use a plastic opening tool to pry the antenna cable connectors from its respective socket on the motherboard.

    • De-route the antenna cable by pulling it out.

    Ajouter un commentaire

    • Use a spudger to lift and remove the black plastic screw cover at the bottom of the phone near the speaker

    • The cover is attached by adhesive, so some force may be required.

    Ajouter un commentaire

    • Insert the flat end of a spudger and pry the frame off the phone.

    • The frame is attached by adhesive, so some force may be required

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Jorge Trujillo

Membre depuis le 19/05/2011

499 Réputation

4 tutoriels rédigés

Équipe

CSU Los Angeles, Team 1-1, Nelson Spring 2011 Membre de l'équipe CSU Los Angeles, Team 1-1, Nelson Spring 2011

CSULA-NELSON-S11S1G1

2 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 2,651