Aller au contenu principal

Motorola V180 Connector Ribbon Replacement

Ce dont vous avez besoin

  1. Motorola V180 Connector Ribbon Replacement, Connector Ribbon: étape 1, image 1 de 1
    • Gently tug on the upper edge of the faceplate, and it will easily detach.

  2. Motorola V180 Connector Ribbon Replacement: étape 2, image 1 de 1
    • Remove the four screws securing the front cover.

  3. Motorola V180 Connector Ribbon Replacement: étape 3, image 1 de 1
    • Gently glide the metallic silver cover outward.

    • This piece is wedged in tight. Try to slide out one hook at a time, instead of both simultaneously.

  4. Motorola V180 Connector Ribbon Replacement: étape 4, image 1 de 1
    • Insert a pair of tweezers between the silver and black sections of the cover.

    • The silver section should now easily snap away.

  5. Motorola V180 Connector Ribbon Replacement: étape 5, image 1 de 1
    • The black rubber component can now easily be taken off.

  6. Motorola V180 Connector Ribbon Replacement: étape 6, image 1 de 1
    • Use a soldering iron to detach the connector ribbon from the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tyler Knisley

Membre depuis le 05/07/10

1 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 6-16, Maness Spring 2010 Membre de l'équipe Cal Poly, Team 6-16, Maness Spring 2010

CPSU-MANESS-S10S6G16

4 membres

13 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 2

Total : 2,614