Aller au contenu principal

Introduction

A guide for replacing or inspecting the Motorola V276 ear speaker

  1. Using the iPod opening tool, place the tool in the small crack that runs along the side of the front case to pry it off
    • Using the iPod opening tool, place the tool in the small crack that runs along the side of the front case to pry it off

  2. Using the T6 Torx Screwdriver remove all 4 small screws.
    • Using the T6 Torx Screwdriver remove all 4 small screws.

  3. Remove silver plate from phone.
    • Remove silver plate from phone.

  4. Using the spudger, remove the plastic camera casing
    • Using the spudger, remove the plastic camera casing

  5. Pull back the logic board
    • Pull back the logic board

  6. Underneath the logic board, use your hands or a spudger to remove the ear speaker
    • Underneath the logic board, use your hands or a spudger to remove the ear speaker

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kyle Klitzner

Membre depuis le 11/04/2010

1 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 27-96, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 membres

15 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,542