Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

Replacing a cracked or malfunctioning main LCD screen.

  1. Using the plastic opening tool, pry off the top faceplate.
    • Using the plastic opening tool, pry off the top faceplate.

    • Place the tool in the small crack that runs along the side of the phone and pry.

  2. Using the T6 Torx Screwdriver remove all 4 small screws.
    • Using the T6 Torx Screwdriver remove all 4 small screws.

  3. Remove silver plate from phone.
    • Remove silver plate from phone.

  4. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  5. Using the spudger remove the plastic camera casing
    • Using the spudger remove the plastic camera casing

  6. Using the iPod Opening Tool remove the yellow flex cable from the green logic board.
    • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

  7. Use Spudger or hands to detach flex cable from front screen logic board
    • Use Spudger or hands to detach flex cable from front screen logic board

  8. Using spudger remove the LCD screen from the green logic board. Using spudger remove the LCD screen from the green logic board.
    • Using spudger remove the LCD screen from the green logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cecilia

Membre depuis le 11/04/2010

1 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 27-96, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 membres

15 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,262