Introduction

Replacing a cracked or malfunctioning LCD display screen.

Using the plastic opening tool, pry off the top faceplate.
  • Using the plastic opening tool, pry off the top faceplate.

  • Place the tool in the small crack that runs along the side of the phone and pry.

Ajouter un commentaire

Using the T6 Torx Screwdriver remove all 4 small screws.
  • Using the T6 Torx Screwdriver remove all 4 small screws.

Ajouter un commentaire

  • Remove silver plate from phone.

Ajouter un commentaire

  • Using the spudger remove the plastic camera casing

Ajouter un commentaire

  • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

Ajouter un commentaire

  • Use Spudger or hands to detach flex cable from front screen logic board

Ajouter un commentaire

  • Using the plastic opening tool, lift the small black flap to unlock the screen from the logic board.

Ajouter un commentaire

  • Using your fingers, carefully pull out the small LCD display screen.

Ajouter un commentaire

  • Remove the small LCD display screen completely from the green logic board.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cecilia

Membre depuis le 11/04/2010

1 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 27-96, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 membres

15 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 2,623