Aller au contenu principal

Introduction

This guide is used for taking apart and/or replacing the computer portion of the phone.

  1. Push down on the chrome button at the bottom of the back of the phone. Slide the outer casing down to reveal the battery Push down on the chrome button at the bottom of the back of the phone. Slide the outer casing down to reveal the battery
    • Push down on the chrome button at the bottom of the back of the phone. Slide the outer casing down to reveal the battery

  2. Apply pressure to the bottom corners of the battery, and then push upwards to lever the battery out.
    • Apply pressure to the bottom corners of the battery, and then push upwards to lever the battery out.

  3. Remove the rubber screw covers using a plastic spudger. Use a T-6 screw bit to remove the screws. Use a T-6 screw bit to remove the screws.
    • Remove the rubber screw covers using a plastic spudger.

    • Use a T-6 screw bit to remove the screws.

  4. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  5. Unscrew the antenna.
    • Unscrew the antenna.

  6. Use a plastic opening tool to undo the latches at the indicated spots. Dental tools may be used in place of a plastic opening tool, as they are difficult to use. Warning: exercise caution as the plastic can break.
    • Use a plastic opening tool to undo the latches at the indicated spots.

    • Dental tools may be used in place of a plastic opening tool, as they are difficult to use.

    • Warning: exercise caution as the plastic can break.

  7. Remove the computer connection (copper flap) by first loosening it with a plastic opening tool. Lift the connection up with your finger.
    • Remove the computer connection (copper flap) by first loosening it with a plastic opening tool.

    • Lift the connection up with your finger.

  8. Use your finger to remove the pressure pad from the buttons on the side of the casing. Remove the plastic flap from around the buttons by lifting it up and pulling it out. Gently lift the logic board up.
    • Use your finger to remove the pressure pad from the buttons on the side of the casing.

    • Remove the plastic flap from around the buttons by lifting it up and pulling it out.

    • Gently lift the logic board up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

gregatron

Membre depuis le 29/10/2009

105 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 6-6, Maness Fall 2009 Membre de l'équipe Cal Poly, Team 6-6, Maness Fall 2009

CPSU-MANESS-F09S6G6

4 membres

12 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 13

Total : 2,975