Aller au contenu principal

Introduction

How to replace the keypad and keypad logic board.

Pièces

Aucune pièce spécifiée.

  1. Depress the silver button. Pull from top of phone to lift the cover.
    • Depress the silver button.

    • Pull from top of phone to lift the cover.

  2. Hold battery from both sides at the bottom. Push upwards and gently lift to remove.
    • Hold battery from both sides at the bottom.

    • Push upwards and gently lift to remove.

  3. Remove 4 screws from corners using T-6 screwdriver.
    • Remove 4 screws from corners using T-6 screwdriver.

    • NOTE: Bottom two screws are gold.

    • NOTE: Make sure screws return to correct place when reassembling.

  4. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  5. Use plastic opening tool to pry up back cover from two side clips. NOTE: Sticker might be attached to rest of phone.
    • Use plastic opening tool to pry up back cover from two side clips.

    • NOTE: Sticker might be attached to rest of phone.

  6. Remove the back cover.
    • Remove the back cover.

  7. Use a plastic opening tool to gently remove the orange ribbon cable. Lift up the main logic board.
    • Use a plastic opening tool to gently remove the orange ribbon cable.

    • Lift up the main logic board.

    • NOTE: Rubber side buttons are not secure and might detach from the main logic board during removal.

  8. Remove the keypad logic board. NOTE: Plastic spacer is not secured to keypad logic board and might detach during removal.
    • Remove the keypad logic board.

    • NOTE: Plastic spacer is not secured to keypad logic board and might detach during removal.

  9. Remove the keypad. Remove the keypad. Remove the keypad.
    • Remove the keypad.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Kuroiwa

Membre depuis le 10/04/2010

1 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 25-86, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 25-86, Amido Spring 2010

CPSU-AMIDO-S10S25G86

5 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,051