Aller au contenu principal

Introduction

How to replace the logic board.

  1. Depress the silver button. Pull from top of phone to lift the cover.
    • Depress the silver button.

    • Pull from top of phone to lift the cover.

  2. Hold battery from both sides at the bottom. Push upwards and gently lift to remove.
    • Hold battery from both sides at the bottom.

    • Push upwards and gently lift to remove.

  3. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  4. Remove 4 screws from corners using T-6 screwdriver.
    • Remove 4 screws from corners using T-6 screwdriver.

    • NOTE: Bottom two screws are gold.

    • NOTE: Make sure screws return to correct place when reassembling.

  5. Use a plastic opening tool to pry up back cover from the two side clips. NOTE: sticker might be attached to rest of phone.
    • Use a plastic opening tool to pry up back cover from the two side clips.

    • NOTE: sticker might be attached to rest of phone.

  6. Remove the back cover.
    • Remove the back cover.

  7. Use a plastic opening tool to gently remove the orange ribbon cable. Lift up the main logic board to remove.
    • Use a plastic opening tool to gently remove the orange ribbon cable.

    • Lift up the main logic board to remove.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Kuroiwa

Membre depuis le 10/04/2010

1 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 25-86, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 25-86, Amido Spring 2010

CPSU-AMIDO-S10S25G86

5 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,251