Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

This guide will cover the steps on how to remove the back plate of a Motorola V60i.

Pièces

Aucune pièce spécifiée.

  1. Flip the phone over to see back cover. Using either finger or spudger tool press button located  near the top of phone by the antenna.
    • Flip the phone over to see back cover.

    • Using either finger or spudger tool press button located near the top of phone by the antenna.

  2. Pry up back plate from phone to reveal battery. Push button near bottom of battery using either your finger of the spudger.  This will release the battery.
    • Pry up back plate from phone to reveal battery.

    • Push button near bottom of battery using either your finger of the spudger. This will release the battery.

  3. Using a T6 Torx Screwdriver, remove the four torx screws from the back of the phone.
    • Using a T6 Torx Screwdriver, remove the four torx screws from the back of the phone.

  4. Simultaneously press the highlighted buttons on both sides of phone. Simultaneously press the highlighted buttons on both sides of phone.
    • Simultaneously press the highlighted buttons on both sides of phone.

  5. Separate back plate from the rest of phone.
    • Separate back plate from the rest of phone.

    • Do not pull the wire connecting the front and back plates.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Elizabeth OBrien

Membre depuis le 26/04/2010

31 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 30-40, Garner Spring 2010 Membre de l'équipe Cal Poly, Team 30-40, Garner Spring 2010

CPSU-GARNER-S10S30G40

4 membres

14 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 27

Total : 3,249