Motorola V60i Keypad Replacement

Step 1 Battery



• Flip the phone over so the back cover is facing up.
• Using either a finger or a spudger, press the button located near the top of the phone by the antenna.
Step 2



• Pry up the back plate from the phone.
• Push the button near the bottom of the battery using either your finger or the spudger to release the battery.
Step 3 Back Plate
• Using a T6 Torx screwdriver, remove the four screws from the back of the phone.
Step 4
• Simultaneously press the highlighted buttons on both sides of phone.
Step 5
• Separate the back plate from the rest of phone.
• Do not pull the wire connecting the front and back plates.
Step 6 Motherboard
• Gently lift logic board from back plate.
Step 7
• Place logic board on front cover.
• Unsnap orange wire that connects the logic board to keypad sensor to allow the logic board to move freely.
Step 8 Keypad Sensor
• Once logic board is removed lift the green keypad sensor for the front plate.
Step 9 Keypad
• To replace keypad buttons, lift off white tray containing buttons.

Author

with 6 other contributors

Elizabeth OBrien

Member since: 04/26/10

43 Reputation

7 Guides authored

Badges: 8

• 
• 
• 

+5 more badges

Team

Cal Poly, Team 30-40, Garner Spring 2010 Member of Cal Poly, Team 30-40, Garner Spring 2010

CPSU-GARNER-S10S30G40

4 Members

14 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview