Réparez vos affaires Communauté Boutique

Motorola V710 Logic Board Replacement

Introduction

This repair guide shows how to replace the logic board.

Ce dont vous avez besoin

  1. Motorola V710 Logic Board Replacement, Battery: étape 1, image 1 de 3 Motorola V710 Logic Board Replacement, Battery: étape 1, image 2 de 3 Motorola V710 Logic Board Replacement, Battery: étape 1, image 3 de 3

    • Press down on the back button while pulling away from the body of the phone to release the back cover.

    Modifier

  2. Motorola V710 Logic Board Replacement: étape 2, image 1 de 3 Motorola V710 Logic Board Replacement: étape 2, image 2 de 3 Motorola V710 Logic Board Replacement: étape 2, image 3 de 3

    • Remove the battery from the phone by gently pulling upward on the battery with your fingers.

    Modifier

  3. Motorola V710 Logic Board Replacement, Logic Board: étape 3, image 1 de 2 Motorola V710 Logic Board Replacement, Logic Board: étape 3, image 2 de 2

    • Unscrew and remove the antenna by gripping the base and twisting clockwise.

    • Once the antenna has passed the threading, pull out.

    Modifier

  4. Motorola V710 Logic Board Replacement: étape 4, image 1 de 2 Motorola V710 Logic Board Replacement: étape 4, image 2 de 2

    • Remove the screws from the upper side of the phone with the T6 Torx screwdriver.

    • The first screw is underneath where the antenna was and the other is visible to the right.

    Modifier

  6. Motorola V710 Logic Board Replacement: étape 5, image 1 de 3 Motorola V710 Logic Board Replacement: étape 5, image 2 de 3 Motorola V710 Logic Board Replacement: étape 5, image 3 de 3

    • Insert the spudger under the left corner of the bottom plate.

    • Using a twist and pry motion seperate the bottom plate and work your way to the right.

    • This can be somewhat difficult and require a good deal of work.

    Modifier

  7. Motorola V710 Logic Board Replacement: étape 6, image 1 de 2 Motorola V710 Logic Board Replacement: étape 6, image 2 de 2

    • Use the T6 Torx screwdriver to remove the bottom two screws.

    Modifier

  8. Motorola V710 Logic Board Replacement: étape 7, image 1 de 2 Motorola V710 Logic Board Replacement: étape 7, image 2 de 2

    • Insert the spudger between the key plate and the back of the phone and work your way around the edge of the phone to pop keys off.

    • There is one clasp on either side that needs to be removed before the keys come off.

    • This step is extremely hard and may require time, strength, endurance, and multiple spudgers.

    Modifier

  9. Motorola V710 Logic Board Replacement: étape 8, image 1 de 3 Motorola V710 Logic Board Replacement: étape 8, image 2 de 3 Motorola V710 Logic Board Replacement: étape 8, image 3 de 3

    • Pull the pressure plate forward to expose the logic board.

    • Use the spludger to pry off the plug that connects pressure pad to the logic board.

    • Remove the pressure pad.

    Modifier

  10. Motorola V710 Logic Board Replacement: étape 9, image 1 de 1

    • Use the spudger to pry off the plug that connects logic board to the screen.

    Modifier

  11. Motorola V710 Logic Board Replacement: étape 10, image 1 de 2 Motorola V710 Logic Board Replacement: étape 10, image 2 de 2

    • Remove the logic board.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 6 autres contributeurs

Karl Sanders

Membre depuis le 01/26/10

8 Réputation

7 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

Cal Poly, Team 8-49, Regan Winter 2010 Membre de l'équipe Cal Poly, Team 8-49, Regan Winter 2010

CPSU-REGAN-W10S8G49

5 membres

16 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 2

Total : 1,996