Introduction

Once the back casing has been removed, the charger cover will be accessible for replacement.

Pièces

Aucune pièce nécessaire.

Slide the cover release button towards the bottom of the phone
  • Slide the cover release button towards the bottom of the phone

  • Once the battery cover pops up, slide the cover towards the top of the phone and lift up.

Ajouter un commentaire

Push the battery towards the top of the phone and lift up.
  • Push the battery towards the top of the phone and lift up.

Ajouter un commentaire

  • With a T5 screwdriver, unscrew the four T5 sized screws that hold the case back cover onto the rest of the case.

  • Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other.

Ajouter un commentaire

  • Once you have taken off the back cover of the phone, the charger tab can be lifted out of position on the back cover.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Caitlin Smith

Membre depuis le 22/10/2012

4 Réputation

2 tutoriels rédigés

Équipe

Clemson, Team 14-2, Benson Fall 2012 Membre de l'équipe Clemson, Team 14-2, Benson Fall 2012

CLEM-BENSON-F12S14G2

4 membres

17 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 313