Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Motorola i710 Keypad Sensor Replacement

  1. Motorola i710 Keypad Sensor Replacement, Battery Cover: étape 1, image 1 de 2 Motorola i710 Keypad Sensor Replacement, Battery Cover: étape 1, image 2 de 2
    • Slide the cover release button towards the bottom of the phone

    • Once the battery cover pops up, slide the cover towards the top of the phone and lift up.

  2. Motorola i710 Keypad Sensor Replacement, Battery: étape 2, image 1 de 1
    • Push the battery towards the top of the phone and lift up.

  3. Motorola i710 Keypad Sensor Replacement, Motherboard: étape 3, image 1 de 3 Motorola i710 Keypad Sensor Replacement, Motherboard: étape 3, image 2 de 3 Motorola i710 Keypad Sensor Replacement, Motherboard: étape 3, image 3 de 3
    • Lift the motherboard away from the case of the phone, being careful not to break the wire that goes up into the hinge.

    • Peel the motherboard off of the keypad. The two pieces are glued together and separate without much effort.

    • The motherboard should now be completely disconnected from the phone.

  4. Motorola i710 Keypad Sensor Replacement, Keypad Sensor: étape 4, image 1 de 2 Motorola i710 Keypad Sensor Replacement, Keypad Sensor: étape 4, image 2 de 2
    • Once the motherboard has been removed from the keypad, the keypad sensor can be detached from the phone at the hinge.

    • Gently pry off the cable connecting the keypad sensor. The keypad sensor should now be completely separated from the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Katelyn

Membre depuis le 10/22/12

1 Réputation

2 tutoriels rédigés

Équipe

Clemson, Team 14-2, Benson Fall 2012 Membre de l'équipe Clemson, Team 14-2, Benson Fall 2012

CLEM-BENSON-F12S14G2

4 membres

17 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 296