Introduction

Once the front name plate and Motorola logo have been removed, the LCD Screen Cover can be accessed as shown in this guide.

Pièces

Aucune pièce nécessaire.

Slide the cover release button towards the bottom of the phone
  • Slide the cover release button towards the bottom of the phone

  • Once the battery cover pops up, slide the cover towards the top of the phone and lift up.

Ajouter un commentaire

Push the battery towards the top of the phone and lift up.
  • Push the battery towards the top of the phone and lift up.

Ajouter un commentaire

  • Although the lower half of the phone in these images has been disassembled, it is not necessary for removing the LCD screen.

  • With the help of plastic opening tools, remove the i710 name plate and Motorola logo from the backside of the phone.

  • The four screws holding the upper half of the phone together should now be visible.

Ajouter un commentaire

  • With a H1.5 screwdriver, unscrew the four H1.5 sized screws from the back of the phone.

  • Flip the phone onto its back and, with the help of a plastic opening tool, remove the metal speaker cover that is above the LCD screen.

Ajouter un commentaire

  • Slide a plastic opening tool along the edge of the LCD Screen Cover to separate the cover from the phone casing. Apply a small amount of force towards the cover if necessary.

  • The LCD screen should now be completely separated from the phone.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Carson Meena

Membre depuis le 22/10/2012

16 Réputation

5 tutoriels rédigés

Équipe

Clemson, Team 14-2, Benson Fall 2012 Membre de l'équipe Clemson, Team 14-2, Benson Fall 2012

CLEM-BENSON-F12S14G2

4 membres

17 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 309