Introduction

Replacement of malfunctioning LCD screen.

Open the flip cover of the phone with the LCD screen facing towards you.
  • Open the flip cover of the phone with the LCD screen facing towards you.

Ajouter un commentaire

Use a Razor Blade to remove the screw covers.
  • Use a Razor Blade to remove the screw covers.

  • Razor Blade is very sharp. Use caution.

Ajouter un commentaire

  • Unscrew the screws using a Phillips #00 Screwdriver.

Ajouter un commentaire

  • Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.

Ajouter un commentaire

  • Gently separate the flip cover case from the phone with your hands when the crack is wide enough.

Ajouter un commentaire

  • Partially close the flip cover of the phone in order to take off the outer case.

Ajouter un commentaire

  • Completely remove the outer casing from the phone.

Ajouter un commentaire

  • Place your thumb underneath the protective metal covering to remove it from the phone.

Ajouter un commentaire

  • Gently detach the black microchip from the phone with a Tweezer.

Ajouter un commentaire

  • Prop out the LCD board from the phone using your fingertips.

Ajouter un commentaire

  • Remove the LCD board from the phone by grabbing the bottom side of the LCD board.

Ajouter un commentaire

  • Firmly detach the gold strip using a Tweezer.

Ajouter un commentaire

  • Prop out the LCD screen using a Small Flathead Screwdriver.

Ajouter un commentaire

  • Remove the LCD screen from the LCD board.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Aw

Membre depuis le 08/04/2010

1 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 34-56, Forte Spring 2010 Membre de l'équipe Cal Poly, Team 34-56, Forte Spring 2010

CPSU-FORTE-S10S34G56

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,037