Aller au contenu principal

Motorola i90c speaker replacement

Ce dont vous avez besoin

  1. Motorola i90c speaker replacement, Battery: étape 1, image 1 de 3 Motorola i90c speaker replacement, Battery: étape 1, image 2 de 3 Motorola i90c speaker replacement, Battery: étape 1, image 3 de 3
    • Slide the notch downward while pulling the back cover off to remove it.

  2. Motorola i90c speaker replacement: étape 2, image 1 de 3 Motorola i90c speaker replacement: étape 2, image 2 de 3 Motorola i90c speaker replacement: étape 2, image 3 de 3
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

  3. Motorola i90c speaker replacement, Antenna: étape 3, image 1 de 2 Motorola i90c speaker replacement, Antenna: étape 3, image 2 de 2
    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

  4. Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: étape 4, image 1 de 3 Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: étape 4, image 2 de 3 Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: étape 4, image 3 de 3
    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

  5. Motorola i90c speaker replacement: étape 5, image 1 de 2 Motorola i90c speaker replacement: étape 5, image 2 de 2
    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

  6. Motorola i90c speaker replacement: étape 6, image 1 de 3 Motorola i90c speaker replacement: étape 6, image 2 de 3 Motorola i90c speaker replacement: étape 6, image 3 de 3
    • Carefully pry off the connection between the headphone jack and logic board.

  7. Motorola i90c speaker replacement, Speaker System: étape 7, image 1 de 3 Motorola i90c speaker replacement, Speaker System: étape 7, image 2 de 3 Motorola i90c speaker replacement, Speaker System: étape 7, image 3 de 3
    • Use the prying tools to wedge out the circular part of the speaker system.

    • Carefully pull out the wiring and circuit board attached to the speaker system using a prying tool or tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jorge

Membre depuis le 04/14/10

4 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 29-61, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,178