Motorola syn1654A Speaker Module Replacement - Tutoriel de réparation iFixit

Introduction

Before proceeding with the replacement guide, please ensure the headphones are unplugged from any device.

Ce dont vous avez besoin

Étape 1 Speaker Module

Motorola syn1654A Speaker Module Replacement, Speaker Module: étape 1, image 1 de 2

Motorola syn1654A Speaker Module Replacement, Speaker Module: étape 1, image 2 de 2

See the speaker replacement guide and follow steps 1 and 2.

Étape 2

Motorola syn1654A Speaker Module Replacement: étape 2, image 1 de 1

Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.
To avoid stripping screws, be sure to use the right drill bit oriented perpendicular to the face of the screw.

Étape 3

Motorola syn1654A Speaker Module Replacement: étape 3, image 1 de 1

Carefully lift the speaker out of its housing while leaving all wires connected.

Étape 4

Motorola syn1654A Speaker Module Replacement: étape 4, image 1 de 1

Lift the module out of the headphone cup, leaving all wires attached.
Clip the two wires circled in orange.
Now that the speaker is free set it aside.
Clip the two wires circled in yellow.
Replace speaker module and solder it to the two wires circled in orange.
Now solder the speaker wires (circled in yellow) back to the module.
For soldering see the ifixit soldering guide: Comment souder et dessouder des connexions

Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Ben

Membre depuis le 02/24/14

104 Réputation

1 tutoriel rédigé

+ 4 badges supplémentaires

Équipe

Michigan Tech, Team 5-1, Lauer Spring 2014 Membre de l'équipe Michigan Tech, Team 5-1, Lauer Spring 2014

MTU-LAUER-S14S5G1

2 membres

3 tutoriels rédigés

0 commentaires

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 240