Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

This guide details how to remove the camera's case.

Pièces

Aucune pièce spécifiée.

  1. Using a Philips head screwdriver, remove the eight 6mm screws located at the bottom of the device.
    • Using a Philips head screwdriver, remove the eight 6mm screws located at the bottom of the device.

  2. Remove the butterfly nut from the lid arm.
    • Remove the butterfly nut from the lid arm.

  3. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  4. Remove the lid-covering.
    • Remove the lid-covering.

  5. Using a Phillips head screwdriver, remove the six 4mm screws from the face of the camera.
    • Using a Phillips head screwdriver, remove the six 4mm screws from the face of the camera.

  6. Gently separate the two halves of the case.
    • Gently separate the two halves of the case.

    • The two halves are connected by a wire. Pulling too roughly can damage the wires and cause the camera to stop functioning.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sean Hill

Membre depuis le 29/01/2015

434 Réputation

4 tutoriels rédigés

Équipe

UW Tacoma, Team 3-7, Rose Winter 2015 Membre de l'équipe UW Tacoma, Team 3-7, Rose Winter 2015

UWT-ROSE-W15S3G7

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 114