Mountain Bike Brake Lever Replacement

Introduction

This guide is for those looking to replace their brake lever assembly on a mountain bike. It is a fairly simple task that does not require much prior bike knowledge. It only requires a 5mm Allen key, the lever assembly, isopropyl alcohol, and the bike.

Ce dont vous avez besoin

Étape 1 Mountain Bike Brake Lever

Mountain Bike Brake Lever Replacement, Mountain Bike Brake Lever: étape 1, image 1 de 2

Mountain Bike Brake Lever Replacement, Mountain Bike Brake Lever: étape 1, image 2 de 2

Remove the grip from the handle.
Do this by twisting and pulling the grip until it slides off.

Modifier

Étape 2

Using a 5mm allen key, loosen the lever assembly from the handle.
Slide the assembly off of the handle.

Modifier

Étape 3

Take your new lever assembly and slide it onto the handle; leave it loose.

Modifier

Étape 4

Pour a light amount of isopropyl alcohol through your grip and slide it back onto the handle.

Modifier

Étape 5

Line up your lever assembly back into place.
Tighten the screw with the allen key to secure it.

Modifier

Étape 6

Mountain Bike Brake Lever Replacement: étape 6, image 3 de 3

Install the brake cable into the lever housing.
Take the brake cable and feed it into the lever pull.

Modifier

Étape 7

Mountain Bike Brake Lever Replacement: étape 7, image 3 de 3

Feed the cable into the lever assembly slot and through the barrel adjuster.
Use the barrel adjuster to tighten the cable intro place.

Modifier

Conclusion

Now your lever assembly should be properly hooked up and ready to function! Giving the lever a couple test pulls to make sure it is applying brake pressure is recommended.

Une autre personne a terminé cette réparation.