Aller au contenu principal

N-Strike Nite Finder EX-3 Trigger Replacement

Ce dont vous avez besoin

  1. N-Strike Nite Finder EX-3 Trigger Replacement, Trigger: étape 1, image 1 de 1
    • Place the blaster upside down on the table, and remove the screw in the bottom of the handle.

    • Remove the battery door and take the batteries out.

  2. N-Strike Nite Finder EX-3 Trigger Replacement: étape 2, image 1 de 3 N-Strike Nite Finder EX-3 Trigger Replacement: étape 2, image 2 de 3 N-Strike Nite Finder EX-3 Trigger Replacement: étape 2, image 3 de 3
    • Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all 14 phillips head, 8.2 mm screws and set them aside.

    • Lift the side of the blaster off exposing its internal parts.

  3. N-Strike Nite Finder EX-3 Trigger Replacement: étape 3, image 1 de 2 N-Strike Nite Finder EX-3 Trigger Replacement: étape 3, image 2 de 2
    • Remove the phillips head, 10.2 mm screw holding the trigger in place.

  4. N-Strike Nite Finder EX-3 Trigger Replacement: étape 4, image 1 de 1
    • Remove the trigger by pulling the piece straight up.

    • Caution: Do not let the spring fly off the spring

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kyle Schober

Membre depuis le 02/24/14

640 Réputation

5 tutoriels rédigés

Équipe

Michigan Tech, Team 5-8, Lauer Spring 2014 Membre de l'équipe Michigan Tech, Team 5-8, Lauer Spring 2014

MTU-LAUER-S14S5G8

3 membres

13 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 1,758