Réparez vos affaires Communauté Boutique

Neato BOTVAC CONNECTED Filter Replacement

Introduction

In this guide you will be able to replace the filter of the Neato Botvac Connected. The filter will need to be changed or cleaned once too much debris has built up causing the vacuum to no longer pick up dirt. The filter of the vacuum should be changed every few months to ensure the Neato Botvac is picking up debris properly. Following this guide comes after first following the guide to replace the battery to ensure safety.

Ce dont vous avez besoin

  1. Neato BOTVAC CONNECTED Filter Replacement, Battery: étape 1, image 1 de 1

    • Place the top of the Neato Botvac Connected against a flat surface.

    Modifier

  2. Neato BOTVAC CONNECTED Filter Replacement: étape 2, image 1 de 2 Neato BOTVAC CONNECTED Filter Replacement: étape 2, image 2 de 2

    • Remove the two 5.5 mm screws with a Phillips #2 screwdriver.

    Modifier

  3. Neato BOTVAC CONNECTED Filter Replacement: étape 3, image 1 de 2 Neato BOTVAC CONNECTED Filter Replacement: étape 3, image 2 de 2

    • Using the spudger, remove the panel covering the battery.

    Modifier

  5. Neato BOTVAC CONNECTED Filter Replacement: étape 4, image 1 de 3 Neato BOTVAC CONNECTED Filter Replacement: étape 4, image 2 de 3 Neato BOTVAC CONNECTED Filter Replacement: étape 4, image 3 de 3

    • Gently remove the connecting wires attached to the battery.

    • The wires are attached to the vacuum through a clip.

    Modifier

  6. Neato BOTVAC CONNECTED Filter Replacement: étape 5, image 1 de 1

    • Using the spudger, gently remove the battery from the device.

    Modifier

  7. Neato BOTVAC CONNECTED Filter Replacement, Filter: étape 6, image 1 de 1

    • Flip the cleaner around and locate the front panel.

    Modifier

  8. Neato BOTVAC CONNECTED Filter Replacement: étape 7, image 1 de 1

    • Gently remove the front panel by opening it with a spudger.

    Modifier

  9. Neato BOTVAC CONNECTED Filter Replacement: étape 8, image 1 de 2 Neato BOTVAC CONNECTED Filter Replacement: étape 8, image 2 de 2

    • Use the spudger to gently remove the paper filter.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Justin Silva

Membre depuis le 03/20/23

645 Réputation

5 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

UMass Dartmouth, Team 6-3, Botvin Spring 2023 Membre de l'équipe UMass Dartmouth, Team 6-3, Botvin Spring 2023

UMASSD-BOTVIN-S23S6G3

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 58