Introduction
This guide will show how to remove the barrel from the blaster. A good test to check if the barrel is stuck is shown in Step 6 (we suggest to do this before opening the blaster).
Ce dont vous avez besoin
-
-
-
Once the screws have been removed, lift the top half of the gun off.
-
Take care and try not to lose any smaller pieces as you open it up.
-
Locking tab for attachments.
what is a locking tab? and where do i see it? sorry my english is bad
its the front sight post
-
-
-
Start by inspecting the barrel closer for broken components.
-
If the barrel fails to cooperate, continue onto the next steps.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
9 autres ont terminé cette réparation.