Introduction

In some cases when you pull the cocking mechanism back it may not lock. When this happens first check to make sure that you have pulled the mechanism back far enough to lock. After you have checked and it is still not locking open up the crossbow making sure to follow the steps in this guide.

There are 19 1.0 cm screws.
  • There are 19 1.0 cm screws.

Ajouter un commentaire

The cocking device air to be built up inside the Nerf crossbow, which generates the force needed to propel the darts.
  • The cocking device air to be built up inside the Nerf crossbow, which generates the force needed to propel the darts.

Ajouter un commentaire

  • Use the screwdriver and unscrew each screw one-by-one placing each screw on the magnetic mat to insure they do not get lost.

Ajouter un commentaire

  • Separate each part of the Nerf crossbow.

Ajouter un commentaire

  • Make sure the cocking mechanism is properly aligned with the rest of the Nerf crossbow.

Ajouter un commentaire

  • The cocking device needs to be attached to the plunger in order to function properly.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Benjamin Bucklin

Membre depuis le 09/10/2014

1 Réputation

3 tutoriels rédigés

Équipe

University of Maine, Team 1-12, Diaz Fall 2014 Membre de l'équipe University of Maine, Team 1-12, Diaz Fall 2014

UMAINE-DIAZ-F14S1G12

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 42

Total : 1,918