Aller au contenu principal

Nerf Zombie Strike Crossbow Plunger Replacement

Ce dont vous avez besoin

  1. Nerf Zombie Strike Crossbow Plunger Replacement, Plunger: étape 1, image 1 de 1
    • There are 19 1.0 cm screws.

  2. Nerf Zombie Strike Crossbow Plunger Replacement: étape 2, image 1 de 1
    • Use the screwdriver and unscrew each screw one-by-one placing each screw on the magnetic mat to insure they do not get lost.

  3. Nerf Zombie Strike Crossbow Plunger Replacement: étape 3, image 1 de 1
    • Separate each part of the Nerf crossbow.

  4. Nerf Zombie Strike Crossbow Plunger Replacement, Removing the Plunger for Inspection: étape 4, image 1 de 1
    • Carefully remove the plunger from the chamber for inspection.

  5. Nerf Zombie Strike Crossbow Plunger Replacement: étape 5, image 1 de 1
    • Check to make sure the plunger is intact and has the the rubber stopper at the end of it.

    • Also make sure the spring is intact and is not bent.

    • If the spring is bent you can purchase one similar to it at a local hardware store.

  6. Nerf Zombie Strike Crossbow Plunger Replacement: étape 6, image 1 de 1
    • Make sure that plunger is reattached to the cocking mechanism.

  7. Nerf Zombie Strike Crossbow Plunger Replacement: étape 7, image 1 de 1
    • Check chamber to make sure that there are no holes or cracks.

    • If there are holes or crakes then the problem will not be able to be resolved since Nerf does not sell these types of parts.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Benjamin Bucklin

Membre depuis le 10/09/14

61 Réputation

3 tutoriels rédigés

Équipe

University of Maine, Team 1-12, Diaz Fall 2014 Membre de l'équipe University of Maine, Team 1-12, Diaz Fall 2014

UMAINE-DIAZ-F14S1G12

3 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 3

Total : 2,335