Réparez vos affaires Communauté Boutique

Nest Dropcam Pro Motherboard Replacement

Introduction

This guide is used to replace the motherboard of the Nest Dropcam Pro if yours has stopped working. Make sure the device is unplugged before opening.

Ce dont vous avez besoin

  1. Nest Dropcam Pro Motherboard Replacement, Outer Case: étape 1, image 1 de 1

    • Press in the mounting clips on each side of the case to remove the camera from the mount.

    Modifier

  2. Nest Dropcam Pro Motherboard Replacement: étape 2, image 1 de 2 Nest Dropcam Pro Motherboard Replacement: étape 2, image 2 de 2

    • Using a Philips #0 screwdriver, remove the four 3 mm screws.

    Modifier

  3. Nest Dropcam Pro Motherboard Replacement: étape 3, image 1 de 2 Nest Dropcam Pro Motherboard Replacement: étape 3, image 2 de 2

    • Lift the front of the case slowly, as there is an antenna cable attached to the motherboard.

    • Carefully disconnect the antenna cable from the motherboard. You will feel this cable "pop" out of place when disconnected.

    Modifier

    Where do you purchase drop cam pro motherboard?

    Geo - Réponse

  5. Nest Dropcam Pro Motherboard Replacement, Motherboard: étape 4, image 1 de 2 Nest Dropcam Pro Motherboard Replacement, Motherboard: étape 4, image 2 de 2

    • Insert a spudger tool under the micro-USB port and lift to separate the motherboard from the back case.

    Modifier

  6. Nest Dropcam Pro Motherboard Replacement: étape 5, image 1 de 2 Nest Dropcam Pro Motherboard Replacement: étape 5, image 2 de 2

    • Pull the motherboard away from the back case.

    • Unplug the red and black cable connecting the motherboard to the back case.

    Modifier

    may i know what those chips are?

    Thanks.

    julian - Réponse

  7. Nest Dropcam Pro Motherboard Replacement: étape 6, image 1 de 2 Nest Dropcam Pro Motherboard Replacement: étape 6, image 2 de 2

    • Using a Philips #0 screwdriver, remove the four 2 mm screws.

    Modifier

  8. Nest Dropcam Pro Motherboard Replacement: étape 7, image 1 de 2 Nest Dropcam Pro Motherboard Replacement: étape 7, image 2 de 2

    • Lift the lens and LED assembly away from the motherboard.

    • Unplug the yellow and white cable from the motherboard.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

7 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

David Foens

Membre depuis le 09/03/15

893 Réputation

6 tutoriels rédigés

Badges: 19

+ 16 badges supplémentaires

Équipe

USF Tampa, Team 15-4, Blackwell Fall 2015 Membre de l'équipe USF Tampa, Team 15-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S15G4

3 membres

12 tutoriels rédigés

7 commentaires

where we can get the mother board to replace

fercervantes - Réponse

I need this too

kundimberi -

Where can I get the motherboard

xtogamba - Réponse

Can't find it either. Silly to write an entire article for credit if parts arent actually available.

Bruce Weissman - Réponse

searched for the MB online?? Why no mention of where to get it??

anonymous 6761 - Réponse

Source for Dropcam Pro motherboard? Are these actually available anywhere?

Robert the lessor - Réponse

I agree where is the source for Dropcam Pro motherboard? Are these actually available anywhere? @Davidfoenes @yvaneck @geoff @julianw @xtogamba

mendstern - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 17

Total : 8,734