Aller au contenu principal

Introduction

A quick and simple guide for replacing batteries in the Netgear Arlo security camera.

Outils

Pièces

  1. Locate unlock switch on underside of camera and unlock it by sliding it. Once unlocked, slide the cover out and up to open the battery housing. Once unlocked, slide the cover out and up to open the battery housing.
    • Locate unlock switch on underside of camera and unlock it by sliding it.

    • Once unlocked, slide the cover out and up to open the battery housing.

  2. Remove all 4 of the 3.0 Volt batteries from the battery housing.
    • Remove all 4 of the 3.0 Volt batteries from the battery housing.

  3. Inspect prongs at the bottom of the battery housing to ensure that they are not bent or broken before replacing the batteries.
    • Inspect prongs at the bottom of the battery housing to ensure that they are not bent or broken before replacing the batteries.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Connor Krampen

Membre depuis le 08/01/2018

375 Réputation

3 tutoriels rédigés

Équipe

IUPUI, Team S1-G1, Freund Spring 2018 Membre de l'équipe IUPUI, Team S1-G1, Freund Spring 2018

IUPUI-FREUND-S18S1G1

2 membres

6 tutoriels rédigés

i am having a problem charging my arlo pro device

JOSEPH J RUTHERFORD - Réponse

I am having a problem with one of my cameras not recognizing the batteries. I replace the battery and it says that it’s low. I’ve tried the same battery on another one of my cameras and it has a full life of energy. I am out of warranty but wanted to know if maybe I can take take it somewhere to get fixed and where???

lawendolina - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 27

30 derniers jours : 116

Total : 3,773