Aller au contenu principal

Introduction

This guide will allow you to separate the motherboard from the lower case.

Pièces

Aucune pièce spécifiée.

  1. Rotate the device so that the bottom is facing up.
    • Rotate the device so that the bottom is facing up.

  2. Lift up all four rubber pads on the bottom of the router with the plastic opening tool. Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.
    • Lift up all four rubber pads on the bottom of the router with the plastic opening tool.

    • Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router. Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.
    • Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.

  5. Lift the bottom casing straight up from the router.
    • Lift the bottom casing straight up from the router.

  6. Remove the clear plastic casing by lifting it straight up from the router.
    • Remove the clear plastic casing by lifting it straight up from the router.

  7. Separate the motherboard from the top shell by lifting it straight up from the router. Separate the motherboard from the top shell by lifting it straight up from the router.
    • Separate the motherboard from the top shell by lifting it straight up from the router.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Murphy

Membre depuis le 03/10/2011

482 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 21-24, Maness Fall 2011 Membre de l'équipe Cal Poly, Team 21-24, Maness Fall 2011

CPSU-MANESS-F11S21G24

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 1,808