Réparez vos affaires Communauté Boutique

Nexus One Camera Replacement

Ce dont vous avez besoin

  1. Nexus One Camera Replacement, Rear Cover: étape 1, image 1 de 2 Nexus One Camera Replacement, Rear Cover: étape 1, image 2 de 2

    • Using two fingers, push up on the rear cover.

    Modifier

  2. Nexus One Camera Replacement: étape 2, image 1 de 1

    • The rear cover slides up and off.

    Modifier

  3. Nexus One Camera Replacement, Battery: étape 3, image 1 de 1

    • Using the plastic opening tools, pry the left bottom corner of the battery up.

    Modifier

  4. Nexus One Camera Replacement: étape 4, image 1 de 1

    • Pull the battery up and out.

    Modifier

  6. Nexus One Camera Replacement, Battery Housing: étape 5, image 1 de 1

    • Remove the two Torx T5 screws.

    • Remove the one Philips #00 screw.

    Modifier

  7. Nexus One Camera Replacement: étape 6, image 1 de 2 Nexus One Camera Replacement: étape 6, image 2 de 2

    • Using the plastic opening tool, pry up the battery housing upwards.

    • Push pry tool down, undoing the plastic tab.

    Modifier

  8. Nexus One Camera Replacement: étape 7, image 1 de 2 Nexus One Camera Replacement: étape 7, image 2 de 2

    • Pry the upper left tab open on the battery housing.

    Modifier

  9. Nexus One Camera Replacement: étape 8, image 1 de 2 Nexus One Camera Replacement: étape 8, image 2 de 2

    • Pry the top tab of the battery housing.

    Modifier

  10. Nexus One Camera Replacement: étape 9, image 1 de 2 Nexus One Camera Replacement: étape 9, image 2 de 2

    • Pry the right side tab of the battery housing.

    Modifier

  11. Nexus One Camera Replacement: étape 10, image 1 de 2 Nexus One Camera Replacement: étape 10, image 2 de 2

    • Pull up on the battery housing.

    • Slide the battery housing out to remove it.

    Modifier

  12. Nexus One Camera Replacement, Camera: étape 11, image 1 de 3 Nexus One Camera Replacement, Camera: étape 11, image 2 de 3 Nexus One Camera Replacement, Camera: étape 11, image 3 de 3

    • Place the spudger under the metal cover and pry upwards. (shoot bottom side first with tabbed clip)

    • Swap the spudger to the other side of the cover base. Pry upwards. (fix?)

    • Grasp the camera module and pull up.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Niklas Johnson

Membre depuis le 01/31/12

1 207 Réputation

18 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 3,498