Réparez vos affaires Communauté Boutique

Nike+ Sportband Screen Replacement

Introduction

This repair might be needed if your NikePlus Sportband screen has been damaged due to being drop or stepping on the device.

Ce dont vous avez besoin

  1. Nike+ Sportband Screen Replacement, External Case: étape 1, image 1 de 2 Nike+ Sportband Screen Replacement, External Case: étape 1, image 2 de 2

    • To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.

    Modifier

  2. Nike+ Sportband Screen Replacement: étape 2, image 1 de 2 Nike+ Sportband Screen Replacement: étape 2, image 2 de 2

    • Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.

    Modifier

  4. Nike+ Sportband Screen Replacement, Screen: étape 3, image 1 de 2 Nike+ Sportband Screen Replacement, Screen: étape 3, image 2 de 2

    • After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.

    Modifier

  5. Nike+ Sportband Screen Replacement: étape 4, image 1 de 3 Nike+ Sportband Screen Replacement: étape 4, image 2 de 3 Nike+ Sportband Screen Replacement: étape 4, image 3 de 3

    • Use the metal tweezers to pry the screen casing from the body of the device.

    • The screen casing is fastened to the body of the device by four clips located in each corner of the casing.

    Modifier

  6. Nike+ Sportband Screen Replacement: étape 5, image 1 de 2 Nike+ Sportband Screen Replacement: étape 5, image 2 de 2

    • Flip the body of the device over so that the screen is now on the bottom.

    • The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.

    • Successfully resoldering this ribbon cable to the motherboard may prove difficult to the very small traces.

    Modifier

  7. Nike+ Sportband Screen Replacement: étape 6, image 1 de 3 Nike+ Sportband Screen Replacement: étape 6, image 2 de 3 Nike+ Sportband Screen Replacement: étape 6, image 3 de 3

    • Flip the body of the device back over so that the screen is facing up.

    • Using the tweezers, gently lift the screen from body of the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Daniel Burtner

Membre depuis le 02/15/16

101 Réputation

1 tutoriel rédigé

Badges: 4

+ 1 badge de plus

Équipe

IUPUI, Team 9-9, Wilson Spring 2016 Membre de l'équipe IUPUI, Team 9-9, Wilson Spring 2016

IUPUI-WILSON-S16S9G9

5 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 6

Total : 237