Aller au contenu principal

Nike SportWatch GPS Front Panel Replacement

Ce dont vous avez besoin

  1. Nike SportWatch GPS Front Panel Replacement, Front Panel: étape 1, image 1 de 1
    • Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Front Panel Replacement: étape 2, image 1 de 1
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Front Panel Replacement: étape 3, image 1 de 1
    • Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

  4. Nike SportWatch GPS Front Panel Replacement: étape 4, image 1 de 1
    • Carefully use the blue plastic opening tool to pry the main board out of the front panel.

    • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

  5. Nike SportWatch GPS Front Panel Replacement: étape 5, image 1 de 1
    • Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.

    • If you are unfamiliar with this tool use the iOpener guide here

  6. Nike SportWatch GPS Front Panel Replacement: étape 6, image 1 de 1
    • Push the panel out from the back of the screen, using your fingers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ian Eichorn

Membre depuis le 10/22/15

678 Réputation

4 tutoriels rédigés

Équipe

UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 Membre de l'équipe UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015

UMASSD-GULBRANDSEN-F15S5G8

3 membres

5 tutoriels rédigés

Un commentaire

Where I can find the replacement glass? regards

Erick Sobreiro - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 9

Total : 1,262