Aller au contenu principal

Introduction

Here we are going to show you how to replace the O-Ring on the Nikon 1 AW 1 Camera.

Pièces

Aucune pièce spécifiée.

  1. Press and hold the lens release button,  twist the lens in a clockwise motion, then pull it off of the camera. Press and hold the lens release button,  twist the lens in a clockwise motion, then pull it off of the camera.
    • Press and hold the lens release button, twist the lens in a clockwise motion, then pull it off of the camera.

  2. Squeeze the O-ring under the lens support to push out the O-ring. Use a plastic opening tool to get under the O-ring, and slowly work around the metal lens support to pull the O-ring completely out. Squeeze the O-ring under the lens support to push out the O-ring. Use a plastic opening tool to get under the O-ring, and slowly work around the metal lens support to pull the O-ring completely out. Squeeze the O-ring under the lens support to push out the O-ring. Use a plastic opening tool to get under the O-ring, and slowly work around the metal lens support to pull the O-ring completely out.
    • Squeeze the O-ring under the lens support to push out the O-ring. Use a plastic opening tool to get under the O-ring, and slowly work around the metal lens support to pull the O-ring completely out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lester Rodriguez Piti

Membre depuis le 04/10/2016

373 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 3-4, Sullivan Fall 2016 Membre de l'équipe USF Tampa, Team 3-4, Sullivan Fall 2016

USFT-SULLIVAN-F16S3G4

4 membres

6 tutoriels rédigés

Un commentaire

Hello, it appears that Nikon has discontinued the Nikon 1 AW1 WP-O2000 O-ring. Can anyone suggest a non-OEM alternatives?

Justin Wade Thornton - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 451