Introduction

This replacement may be necessary if all other options have been exhausted.

Using a Phillips #000 screwdriver, remove the three bottom screws connected to the back plate on the bottom of the device.
  • Using a Phillips #000 screwdriver, remove the three bottom screws connected to the back plate on the bottom of the device.

  • Remove the screws under the flaps covering the HDMI and mini USB ports.

Ajouter un commentaire

Carefully pry back the back plate.
  • Carefully pry back the back plate.

  • The plastic of the back plate may crack.

Ajouter un commentaire

  • Lift up the screen, and use a Phillips #000 screwdriver to remove the (6) six screws holding down the underlying metal plate.

Ajouter un commentaire

  • Pull back the black switch holding the orange screen ribbon in place, and remove the screen.

Ajouter un commentaire

  • Use the plastic opening tool to pry off the connectors shown

  • Using your finger, pry off the connection flap.

Ajouter un commentaire

  • Using tweezers, pull out the shown connectors

Ajouter un commentaire

  • Pull back the black switches holding the connecting ribbons in place, and pull out the ribbons.

  • Remove the motherboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Austin Lackey

Membre depuis le 26/09/2017

455 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team S11-G4, Passmore Fall 2017 Membre de l'équipe USF Tampa, Team S11-G4, Passmore Fall 2017

USFT-PASSMORE-F17S11G4

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 16

Total : 163