Réparez vos affaires Communauté Boutique

Nikon COOLPIX P2 Case Replacement

Introduction

Replace the outer casing of your camera if it is damaged.

Ce dont vous avez besoin

  1. Nikon COOLPIX P2 Case Replacement, Case: étape 1, image 1 de 1

    • Remove the screw located near the speaker port using a Phillips 00 screwdriver.

    Modifier

  2. Nikon COOLPIX P2 Case Replacement: étape 2, image 1 de 1

    • Turn camera upside down so that the battery compartment is facing you.

    • Remove all four screws from the bottom of the camera with a Phillips 00 screwdriver.

    Modifier

  3. Nikon COOLPIX P2 Case Replacement: étape 3, image 1 de 1

    • Rotate the camera to the opposite side where the A/V outlet is located.

    • Unscrew and remove all four screws with a Phillips 00 screwdriver.

    Modifier

  5. Nikon COOLPIX P2 Case Replacement: étape 4, image 1 de 1

    • Turn the camera so that the Wi-Fi adapter is facing you.

    • Unscrew and remove all four screws with a Phillips 00 screwdriver.

    Modifier

  6. Nikon COOLPIX P2 Case Replacement: étape 5, image 1 de 3 Nikon COOLPIX P2 Case Replacement: étape 5, image 2 de 3 Nikon COOLPIX P2 Case Replacement: étape 5, image 3 de 3

    • Using a plastic opening tool, pry the front casing of the camera.

    • Continue this motion all around the front casing of the camera.

    • Gently pull apart the front casing from the rest of the camera.

    Modifier

  7. Nikon COOLPIX P2 Case Replacement: étape 6, image 1 de 1

    • Using the plastic opening tool pry the back casing of the camera.

    Modifier

  8. Nikon COOLPIX P2 Case Replacement: étape 7, image 1 de 1

    • Orange ribbon is fragile

    • Carefully pull apart the back casing of the camera from the front of the camera without tearing the orange ribbon.

    Modifier

  9. Nikon COOLPIX P2 Case Replacement: étape 8, image 1 de 2 Nikon COOLPIX P2 Case Replacement: étape 8, image 2 de 2

    • Pull down the on the black latch to carefully separate the orange ribbon from the motherboard.

    • Pull apart the orange ribbon and front casing from the rest of the camera.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 11 autres contributeurs

Jessica Brough

Membre depuis le 01/22/12

135 Réputation

2 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

Cal Poly, Team 3-28, Amido Winter 2012 Membre de l'équipe Cal Poly, Team 3-28, Amido Winter 2012

CPSU-AMIDO-W12S3G28

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,102