Introduction
This guide is to be used to install the plastic LCD screen cover in the case that it becomes damaged or no longer functions properly due to overuse. A Phillips screwdriver will be needed to complete this installation.
Ce dont vous avez besoin
-
-
-
Press lightly on the outer surface of the plastic LCD screen cover in each corner.
-
The plastic LCD screen cover should pop out of the back plate.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.