Aller au contenu principal

Ce dont vous avez besoin

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Nikon Coolpix 3200, utilisez notre manuel de réparation.

  1. Nikon Coolpix 3200 Teardown, Nikon Coolpix 3200 Teardown: étape 1, image 1 de 1
    • Use a small Philips screwdriver to remove the screws from the base of the camera.

  2. Nikon Coolpix 3200 Teardown: étape 2, image 1 de 1
    • Use a small Philips screwdriver to remove the screws from the side of the camera where the computer lead is.

  3. Nikon Coolpix 3200 Teardown: étape 3, image 1 de 1
    • Use a small Philips screwdriver to remove the two screws from the side of the camera where the card reader is.

  4. Nikon Coolpix 3200 Teardown: étape 4, image 1 de 1
    • Pry apart the outer casing. A gray plastic threaded piece (used to attach camera to a tripod) will fall out.

  5. Nikon Coolpix 3200 Teardown: étape 5, image 1 de 1
    • Use a Phillips screwdriver to remove the two silver screws that connect the circuit board to the outer front casing.

  6. Nikon Coolpix 3200 Teardown: étape 6, image 1 de 1
    • Pry apart the front outer casing from the circuit board. The camera will now be in three pieces.

  7. Nikon Coolpix 3200 Teardown: étape 7, image 1 de 2 Nikon Coolpix 3200 Teardown: étape 7, image 2 de 2
    • Pull the connecting strip on the circuit board which connects it to the back outer casing.

  8. Nikon Coolpix 3200 Teardown: étape 8, image 1 de 2 Nikon Coolpix 3200 Teardown: étape 8, image 2 de 2
    • Use a Philips screwdriver to remove the two screws next to the computer port and the brass screw on the circuit board.

  9. Nikon Coolpix 3200 Teardown: étape 9, image 1 de 2 Nikon Coolpix 3200 Teardown: étape 9, image 2 de 2
    • Use a Phillips screwdriver to unscrew the three screws that connect the outer lens rim to the front casing.

  10. Nikon Coolpix 3200 Teardown: étape 10, image 1 de 2 Nikon Coolpix 3200 Teardown: étape 10, image 2 de 2
    • Use a Philips screwdriver to remove the three screws that hold the flash cover to the outer front casing.

  11. Nikon Coolpix 3200 Teardown: étape 11, image 1 de 1
    • Open the lid of the battery compartment and use a Philips screwdriver to remove the two screws at the bottom.

  12. Nikon Coolpix 3200 Teardown: étape 12, image 1 de 1
    • Use a Phillips screwdriver to unscrew the two screws that connect the inside battery casing to the front of the outer casing.

  13. Nikon Coolpix 3200 Teardown: étape 13, image 1 de 1
    • Pull off the battery casing from the inside of the outer front casing. The circuit board, battery casing, and front outer casing will be attached by a connecting strip along with red and black wires.

  14. Nikon Coolpix 3200 Teardown: étape 14, image 1 de 1
    • Use scissors to cut the red and black wires away from the battery points of contact.

  15. Nikon Coolpix 3200 Teardown: étape 15, image 1 de 1
    • Pull the connecting strip away from the circuit board to separate it from the front casing.

  16. Nikon Coolpix 3200 Teardown: étape 16, image 1 de 1
    • Use a Philips screwdriver to unscrew the two screws that connect the photo button to the outer front casing.

  17. Nikon Coolpix 3200 Teardown: étape 17, image 1 de 1
    • Firmly press on the photo button and this component will pop out.

  18. Nikon Coolpix 3200 Teardown: étape 18, image 1 de 2 Nikon Coolpix 3200 Teardown: étape 18, image 2 de 2
    • Use a scalpel to pry apart the metal inner part of the button from the plastic outer piece.

  19. Nikon Coolpix 3200 Teardown: étape 19, image 1 de 2 Nikon Coolpix 3200 Teardown: étape 19, image 2 de 2
    • Use your fingernails to peel the outer rim from the front casing.

    • Pull the connecting strip out of the circuit board to separate it from the LCD screen.

    • Use your fingernails to pry apart the back metal piece of the screen (covered by a black plastic film) from the front section of the screen.

  20. Nikon Coolpix 3200 Teardown: étape 22, image 1 de 1
    • Pry apart the back black piece and front white piece of the screen. Inside the screen there are four sheets of plastic: one opaque, two mirrored, and one thicker plastic sheet which has a foil piece attached to it.

    • Use a hammer and chisel to separate the lens piece of the camera from the circuit board.

    • Use your fingernails to pry off the motor, motor cover, and flash piece from the lens piece of the camera.

Milly Whitehead

Membre depuis le 03/09/10

47 Réputation

1 tutoriel rédigé

Un commentaire

Oh, and then just do everything in reverse to put it back together again? That hammer and chisel bit bothers me a bit.

mrs_prolo - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 7

30 derniers jours : 24

Total : 5,903