Aller au contenu principal

Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement

Ce dont vous avez besoin

  1. Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement, Battery: étape 1, image 1 de 2 Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement, Battery: étape 1, image 2 de 2
    • Using your thumb and pointer finger, open the card/battery hatch by pressing the center button of the wheel and turning the entire wheel to the left.

    • When reassembling, you must turn this wheel to the right until it clicks.

  2. Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement: étape 2, image 1 de 2 Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement: étape 2, image 2 de 2
    • You should feel the door begin to loosen. Carefully pull the hatch open.

  3. Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement: étape 3, image 1 de 1
    • Push the yellow battery/charger compartment tab up using your thumb nail.

  4. Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement: étape 4, image 1 de 2 Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement: étape 4, image 2 de 2
    • After pressing the yellow tab, the battery should loosen.

    • Slowly pull the battery completely out.

  5. Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement, Map/Wi-Fi/Action Buttons: étape 5, image 1 de 3 Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement, Map/Wi-Fi/Action Buttons: étape 5, image 2 de 3 Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement, Map/Wi-Fi/Action Buttons: étape 5, image 3 de 3
    • Using the spudger, pry the plastic button face from the camera body.

    • The sharp edges of the spudger could cut you or pierce an exposed battery.

  6. Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement: étape 6, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète
    • Using tweezers from the precision tweezer set, remove the buttons from the larger plastic piece.

  7. Nikon Coolpix AW130 Map/Wi-Fi/Action Buttons Replacement: étape 7, image 1 de 1
    • Using tweezers from the precision tweezer set, remove the silicon backing from the buttons.

    • From there, the buttons should dislodge from their plastic casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lauren Stepp

Membre depuis le 01/29/16

1 251 Réputation

8 tutoriels rédigés

Équipe

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 9

Total : 692