Réparez vos affaires Communauté Boutique

Nikon Coolpix B700 Back Frame Assembly Replacement

Introduction

This guide shows how to remove the back frame assembly of the Nikon Coolpix B700 digital camera. This provides access to the internals of the device.

Ce dont vous avez besoin

  1. Nikon Coolpix B700 Back Frame Assembly Replacement, Back Frame Assembly: étape 1, image 1 de 1

    • Use the Phillips screwdriver to remove the two 5.5 mm screws on the left side of the camera.

    Modifier

  2. Nikon Coolpix B700 Back Frame Assembly Replacement: étape 2, image 1 de 1

    • Use the Phillips screwdriver to remove seven 5.5 mm screws from the bottom of the camera.

    Modifier

  3. Nikon Coolpix B700 Back Frame Assembly Replacement: étape 3, image 1 de 2 Nikon Coolpix B700 Back Frame Assembly Replacement: étape 3, image 2 de 2

    • Use the Phillips screwdriver to remove the two 5.5mm screws on the right side of the camera.

    • Open the HDMI flap to remove a 5.5mm screw.

    • Don't forget to replace the hidden screw under the HDMI flap during reassembly.

    Modifier

  5. Nikon Coolpix B700 Back Frame Assembly Replacement: étape 4, image 1 de 1

    • Use the Phillips screwdriver to remove the two 5.5mm screws under the LCD panel.

    Modifier

  6. Nikon Coolpix B700 Back Frame Assembly Replacement: étape 5, image 1 de 3 Nikon Coolpix B700 Back Frame Assembly Replacement: étape 5, image 2 de 3 Nikon Coolpix B700 Back Frame Assembly Replacement: étape 5, image 3 de 3

    • Open the flash assembly and insert the spudger into the slot under the flash unit and twist.

    • While twisting, pry apart the shell to split the camera in half.

    Modifier

  7. Nikon Coolpix B700 Back Frame Assembly Replacement: étape 6, image 1 de 1

    • Be careful not to damage the ribbons that connect the halves together.

    Modifier

  8. Nikon Coolpix B700 Back Frame Assembly Replacement: étape 7, image 1 de 2 Nikon Coolpix B700 Back Frame Assembly Replacement: étape 7, image 2 de 2

    • Place the pry tool under the black latch. Lift gently until the latch flips up.

    • Gently pull the ribbon away from the latch.

    • Be gentle when taking ribbons out and apart because they are fragile.

    Modifier
Ligne d'arrivée

2 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Carlos Salgado

Membre depuis le 02/27/19

1 429 Réputation

7 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Purdue University Northwest, Team S4-G5, Hingst Spring 2019 Membre de l'équipe Purdue University Northwest, Team S4-G5, Hingst Spring 2019

PNW-HINGST-S19S4G5

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 4

30 derniers jours : 11

Total : 659