Introduction

This guide will walk you through the necessary steps to access and remove the LCD screen in the Nikon Coolpix E5700.

Pièces

Aucune pièce nécessaire.

  1. Use your finger tip to slide the battery release tab toward the battery symbol on the E5700. Open the battery door.
    • Use your finger tip to slide the battery release tab toward the battery symbol on the E5700.

    • Open the battery door.

  2. Pull the battery out of the E5700.
    • Pull the battery out of the E5700.

    • It may be necessary to wiggle the battery while pulling to free it from its pocket in the case.

  3. Remove two Phillips screws (3.4 mm) located on the left side of the screen.
    • Remove two Phillips screws (3.4 mm) located on the left side of the screen.

  4. Remove two Phillips screws (3.4 mm) located on the right side of the screens. Remove two Phillips screws (3.4 mm) located on the right side of the screens.
    • Remove two Phillips screws (3.4 mm) located on the right side of the screens.

  5. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  6. Remove back plastic monitor cover. Remove back plastic monitor cover.
    • Remove back plastic monitor cover.

  7. Remove the Phillips screw on the top right side of the screen.
    • Remove the Phillips screw on the top right side of the screen.

  8. Carefully unplug the grey bundle of wires in the white housing.
    • Carefully unplug the grey bundle of wires in the white housing.

  9. Carefully unplug the small pink and wires in the grey housing.
    • Carefully unplug the small pink and wires in the grey housing.

  10. Remove the two Phillips screws on the left side of the screen.
    • Remove the two Phillips screws on the left side of the screen.

  11. Remove the metal bar on the left side of the screen.
    • Remove the metal bar on the left side of the screen.

    • Remove the screen from the front plastic housing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kyle Sitton

Membre depuis le 17/04/2011

333 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 24-58, Amido Spring 2011 Membre de l'équipe Cal Poly, Team 24-58, Amido Spring 2011

CPSU-AMIDO-S11S24G58

4 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 2,195