Nikon Coolpix L820 LCD Replacement

Introduction

The LCD screen is an essential component of a camera. If the LCD screen stops working, the camera can no longer be used. In this repair guide, you will learn how to replace the LCD screen on the Nikon Coolpix L820 camera.

Ce dont vous avez besoin

Étape 1 Settings Buttons

Nikon Coolpix L820 LCD Replacement, Settings Buttons: étape 1, image 1 de 3

Nikon Coolpix L820 LCD Replacement, Settings Buttons: étape 1, image 2 de 3

Nikon Coolpix L820 LCD Replacement, Settings Buttons: étape 1, image 3 de 3

Remove the battery before beginning.
Use a Phillips #0 screwdriver to remove the screws on the front casing. There are ten screws, three on the left side, two on the bottom, and one on the right side of the camera.

Modifier

Étape 2

Remove the front top Phillips screw with the screwdriver.
Open the empty battery slot on the bottom of the camera, revealing four additional screws.
Unscrew the four Phillips screws with the screwdriver.

Modifier

Étape 3

Nikon Coolpix L820 LCD Replacement: étape 3, image 3 de 3

Using the spudger, move around the casing, carefully separating the rear housing from the camera assembly.
Be sure to only apply pressure to the casing panels and not the sensitive internal electronics.
Once the rear housing is separated, the settings buttons will be accessible for replacement.