Réparez vos affaires Communauté Boutique

Nikon Coolpix P510 LCD Replacement

Introduction

If you are having issues with your LCD, this guide will help you replace it with a minimal effort. This part is easy to get to, and easy to replace. Other than a screwdriver and a plastic opening tool, nothing else is needed to accomplish this.

Ce dont vous avez besoin

  1. Nikon Coolpix P510 LCD Replacement, Battery Removal: étape 1, image 1 de 1

    • Flip the camera over and push the tab on the battery cover to open the battery compartment.

    Modifier

  2. Nikon Coolpix P510 LCD Replacement: étape 2, image 1 de 2 Nikon Coolpix P510 LCD Replacement: étape 2, image 2 de 2

    • Push the little yellow tab to allow the battery to slide out.

    • With the tab pushed out, pull the battery out.

    Modifier

  3. Nikon Coolpix P510 LCD Replacement, LCD Screen Window: étape 3, image 1 de 2 Nikon Coolpix P510 LCD Replacement, LCD Screen Window: étape 3, image 2 de 2

    • Extend the LCD screen out and turn the camera upside down to get access to the screws on the bottom.

    Modifier

  5. Nikon Coolpix P510 LCD Replacement: étape 4, image 1 de 2 Nikon Coolpix P510 LCD Replacement: étape 4, image 2 de 2

    • Take the four 4mm PH00 Phillips screws out.

    Modifier

  6. Nikon Coolpix P510 LCD Replacement: étape 5, image 1 de 2 Nikon Coolpix P510 LCD Replacement: étape 5, image 2 de 2

    • Use a plastic opening tool to trace around the screen to pop the front and back section apart.

    Modifier

  7. Nikon Coolpix P510 LCD Replacement, LCD: étape 6, image 1 de 2 Nikon Coolpix P510 LCD Replacement, LCD: étape 6, image 2 de 2

    • Tilt the LCD up to get access to the back of it.

    Modifier

  8. Nikon Coolpix P510 LCD Replacement: étape 7, image 1 de 2 Nikon Coolpix P510 LCD Replacement: étape 7, image 2 de 2

    • Unplug the ribbon cables on the side of the chip under the LCD by simple pulling lightly on them.

    Modifier

  9. Nikon Coolpix P510 LCD Replacement: étape 8, image 1 de 1

    • The chip has an adhesive on it to keep it attached to the LCD, and you will need to use a plastic opening tool to get it off.

    • It may take a little bit of pressure to get the chip off. Be gentle to make sure you don't break the chip.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Brian Hulsey

Membre depuis le 03/31/15

1 461 Réputation

6 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Colorado Springs, Team 2-2, Panko Spring 2015 Membre de l'équipe Colorado Springs, Team 2-2, Panko Spring 2015

UCCS-PANKO-S15S2G2

3 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 28

30 derniers jours : 72

Total : 5,511