Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove all five screws from the bottom of the camera using a Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Open the battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of the orange lever.
-
Remove this screw using a Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Rotate the camera to find the side panel with the lanyard attachment.
-
Detach the side panel by the lifting bottom corner slightly with the spudger.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With the back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.