Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Turn over camera to find 5 apparent screws.
    • Turn over camera to find 5 apparent screws.

  2. Remove all 5 screws from the bottom of the camera and store them carefully.
    • Remove all 5 screws from the bottom of the camera and store them carefully.

  3. Open battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of orange lever. Remove this screw.
    • Open battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of orange lever. Remove this screw.

  4. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  5. Rotate camera to find side panel with lanyard attachment. Detach side panel by lifting bottom corner slightly with the spudger.
    • Rotate camera to find side panel with lanyard attachment. Detach side panel by lifting bottom corner slightly with the spudger.

  6. Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.
    • Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.

  7. With back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.
    • With back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.

  8. On back of LCD screen, locate the three screws underneath the ribbon and remove them.
    • On back of LCD screen, locate the three screws underneath the ribbon and remove them.

  9. Take out rectangular component on the side where the screws were. Pry apart screen from back casing using the spudger.
    • Take out rectangular component on the side where the screws were.

    • Pry apart screen from back casing using the spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan

Membre depuis le 12/04/2011

131 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 18-24, Garner Spring 2011 Membre de l'équipe Cal Poly, Team 18-24, Garner Spring 2011

CPSU-GARNER-S11S18G24

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 2,149