Réparez vos affaires Communauté Boutique

Nikon Coolpix S6300 Display Replacement

Introduction

This guide shows how to replace a broken display

Ce dont vous avez besoin

  1. Nikon Coolpix S6300 Display Replacement, Battery: étape 1, image 1 de 1

    • Place the camera facing upwards.

    • Press down on the battery cover and slide towards the front face of the camera.

    Modifier

  2. Nikon Coolpix S6300 Display Replacement: étape 2, image 1 de 1

    • Rotate the orange battery clip in the camera to release the battery.

    Modifier

  3. Nikon Coolpix S6300 Display Replacement, Buttons: étape 3, image 1 de 3 Nikon Coolpix S6300 Display Replacement, Buttons: étape 3, image 2 de 3 Nikon Coolpix S6300 Display Replacement, Buttons: étape 3, image 3 de 3

    • Locate the eight outer PH 2mm screws on the device.

    • Using the PH00 screwdriver remove all of the screws from the camera.

    Modifier

  5. Nikon Coolpix S6300 Display Replacement: étape 4, image 1 de 3 Nikon Coolpix S6300 Display Replacement: étape 4, image 2 de 3 Nikon Coolpix S6300 Display Replacement: étape 4, image 3 de 3

    • Using a plastic opening tool, gently pry off the front and rear plates.

    • Be patient with this step, do not force the clips holding the plates together.

    Modifier

  6. Nikon Coolpix S6300 Display Replacement: étape 5, image 1 de 1

    • Using a Phillips #00 screwdriver, remove the PH 2mm screw located to the right of the screen, above the OK dial.

    Modifier

  7. Nikon Coolpix S6300 Display Replacement: étape 6, image 1 de 1

    • Remove the two clasp using a plastic spudger

    • Be careful when removing the clasp to prevent ripping of the clasp

    Modifier

  8. Nikon Coolpix S6300 Display Replacement: étape 7, image 1 de 1

    • You may now remove the internal panel of the buttons

    Modifier

  9. Nikon Coolpix S6300 Display Replacement, Display: étape 8, image 1 de 1

    • Remove the clasp from the ribbon cable using the plastic spudger.

    • Make sure to be gentle when removing the clasp to prevent it from ripping.

    • You may now remove the display.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Hung

Membre depuis le 09/01/15

383 Réputation

2 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

USF Tampa, Team 1-2, Remmell Fall 2015 Membre de l'équipe USF Tampa, Team 1-2, Remmell Fall 2015

USFT-REMMELL-F15S1G2

5 membres

10 tutoriels rédigés

2 commentaires

Step 8 could have better pictures and explanation of the clasp...or picture of the clasp. I think it was some white tape looking stuff that I did break. Looking for better instructions elsewhere. I think I just made the situation worse

Lisa F - Réponse

I have this problem with my coolpix (see images and video):

https://i.postimg.cc/pXk2L4QB/20190201-1...

https://i.postimg.cc/d3wYqjLX/20190201-1...

https://i.postimg.cc/RCLmgyYz/20190201-1...

https://drive.google.com/file/d/1sDr8fPD...

Screen has a posterized effect.

I already replaced the screen with a new one, but the problem remains..

Any idea what is faulty, and how can I fix it?

Geo Nik - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 16

Total : 1,407