Réparez vos affaires Communauté Boutique

Nikon Coolpix S6300 Zoom Lens Gears

Introduction

After following the prerequisite guides, the gear can reached by removing the lens apparatus. When the primary gear is exposed, it can simply be lifted out of the camera and inspected.

Ce dont vous avez besoin

  1. Nikon Coolpix S6300 Zoom Lens Gears, Battery: étape 1, image 1 de 1

    • Place the camera facing upwards.

    • Press down on the battery cover and slide towards the front face of the camera.

    Traduire

  2. Nikon Coolpix S6300 Zoom Lens Gears: étape 2, image 1 de 1

    • Rotate the orange battery clip in the camera to release the battery.

    Traduire

  3. Nikon Coolpix S6300 Zoom Lens Gears, Buttons: étape 3, image 1 de 3 Nikon Coolpix S6300 Zoom Lens Gears, Buttons: étape 3, image 2 de 3 Nikon Coolpix S6300 Zoom Lens Gears, Buttons: étape 3, image 3 de 3

    • Locate the eight outer PH 2mm screws on the device.

    • Using the PH00 screwdriver remove all of the screws from the camera.

    Traduire

  4. Nikon Coolpix S6300 Zoom Lens Gears: étape 4, image 1 de 3 Nikon Coolpix S6300 Zoom Lens Gears: étape 4, image 2 de 3 Nikon Coolpix S6300 Zoom Lens Gears: étape 4, image 3 de 3

    • Using a plastic opening tool, gently pry off the front and rear plates.

    • Be patient with this step, do not force the clips holding the plates together.

    Traduire

  5. Nikon Coolpix S6300 Zoom Lens Gears: étape 5, image 1 de 1

    • Using a Phillips #00 screwdriver, remove the PH 2mm screw located to the right of the screen, above the OK dial.

    Traduire

  7. Nikon Coolpix S6300 Zoom Lens Gears: étape 6, image 1 de 1

    • Remove the two clasp using a plastic spudger

    • Be careful when removing the clasp to prevent ripping of the clasp

    Traduire

  8. Nikon Coolpix S6300 Zoom Lens Gears: étape 7, image 1 de 1

    • You may now remove the internal panel of the buttons

    Traduire

  9. Nikon Coolpix S6300 Zoom Lens Gears, Display: étape 8, image 1 de 1

    • Remove the clasp from the ribbon cable using the plastic spudger.

    • Make sure to be gentle when removing the clasp to prevent it from ripping.

    • You may now remove the display.

    Traduire

  10. Nikon Coolpix S6300 Zoom Lens Gears, Polarizing Lens: étape 9, image 1 de 3 Nikon Coolpix S6300 Zoom Lens Gears, Polarizing Lens: étape 9, image 2 de 3 Nikon Coolpix S6300 Zoom Lens Gears, Polarizing Lens: étape 9, image 3 de 3

    • Remove the four PH00 2.5 mm screws around the edges of the display plate.

    • Remove the three PH00 2 mm screws from the sides of the buttons plate and the 2.5 mm screw from the center of the buttons plate.

    • Lift the buttons plate out of the camera with the plastic tool.

    • Lift the display plate out of the camera with the plastic tool.

    Traduire

  11. Nikon Coolpix S6300 Zoom Lens Gears: étape 10, image 1 de 3 Nikon Coolpix S6300 Zoom Lens Gears: étape 10, image 2 de 3 Nikon Coolpix S6300 Zoom Lens Gears: étape 10, image 3 de 3

    • Use the plastic opening tool to gently flip the white folders at the end of the ribbon cables.

    • Use this tweezers to gently pull the cables out of the holders.

    • Lift the lens apparatus out of the rest of the camera by pushing the front of lens up from the bottom.

    Traduire

  12. Nikon Coolpix S6300 Zoom Lens Gears: étape 11, image 1 de 2 Nikon Coolpix S6300 Zoom Lens Gears: étape 11, image 2 de 2

    • Use the plastic opening tool to flip the two white clips holding the ribbon cables.

    • Use tweezers to pull the cables from clamps.

    • Use the PH00 screwdriver to remove the three 2 mm screws around the first lens area.

    Traduire

  13. Nikon Coolpix S6300 Zoom Lens Gears: étape 12, image 1 de 2 Nikon Coolpix S6300 Zoom Lens Gears: étape 12, image 2 de 2

    • Lift the first lens from the rest of the lens apparatus.

    • Use thin tweezers to left and remove the polarizing lens from the apparatus.

    Traduire

  14. Nikon Coolpix S6300 Zoom Lens Gears, Zoom Lens Gears: étape 13, image 1 de 1

    • Check to see if there are any items stuck inside the gear.

    • Carefully remove items using tweezers.

    • If the gears are popped out of place, carefully push the gears back into its original position shown in the picture

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Hung

Membre depuis le 09/01/15

383 Réputation

2 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

USF Tampa, Team 1-2, Remmell Fall 2015 Membre de l'équipe USF Tampa, Team 1-2, Remmell Fall 2015

USFT-REMMELL-F15S1G2

5 membres

10 tutoriels rédigés

Un commentaire

Attention rester sur une table, et bien suivre le tutoriel. En effet, il y a des pilles, Pas la batterie: donc si vous touchez le haut de l'appareil, il y a un peux d’électricité max 4w , ce qui surprend....C'est pas dangereux mais cela surprend. Pas toucher le haut de l'appareil..... Ferreria J-C

a420mf - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 6

30 derniers jours : 11

Total : 1,361