Introduction

This guide will teach you how to get to the point where you can replace either the drip stop toggle and/or the brew basket. In a lot of coffee machines after heavy use the brew based can start to leak, and these fixes are very similar, so that is why we did both of these fixes together. Warning: be very careful when unscrewing the brew basket because there is a small spring that releases the drip stop toggle that needs to stay in place. Also you will need a longer skinnier Phillips head screwdriver than the one in the iFixit tool kit to complete this repair.

Pièces

Aucune pièce nécessaire.

Slide brew baskets to open position
  • Slide brew baskets to open position

Ajouter un commentaire

Unscrew three 6mm screws with Phillips head screw driver (need a thinner screwdriver than the one in the ifixit tool kit)
  • Unscrew three 6mm screws with Phillips head screw driver (need a thinner screwdriver than the one in the ifixit tool kit)

Ajouter un commentaire

  • Using needle nose tweezers, push the bottom of the pin up from behind the brew basket

  • Using needle nose tweezers, pull out the pin

Ajouter un commentaire

  • Remove brew basket from swinging basket holder

Ajouter un commentaire

  • Unscrew one 6mm screw from drip stop toggle

  • Remove drip stop toggle

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Naser Aldousari

Membre depuis le 10/10/2017

301 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team S13-G69, Cagle Fall 2017 Membre de l'équipe USF Tampa, Team S13-G69, Cagle Fall 2017

USFT-CAGLE-F17S13G69

4 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 10

30 derniers jours : 74

Total : 580