Réparez vos affaires Communauté Boutique

Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement

Introduction

The water reservoir hanger is located on the left side of the brew basket and filter. This small component is crucial for making sure the water reservoir is secure and attached to the rest of the device. Follow this guide to replace the water reservoir hanger and resecure your water reservoir.

Ce dont vous avez besoin

  1. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: étape 1, image 1 de 2 Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: étape 1, image 2 de 2

    • Remove single 6mm #1 Phillips head screw from the side of the unit and four 6mm screws from under the basket area.

    Traduire

  3. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: étape 2, image 1 de 2 Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: étape 2, image 2 de 2

    • Gently pry the upper panel up from the unit.

    Traduire

  4. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: étape 3, image 1 de 1

    • Inside the panel, remove the two 6mm #1 Phillips head screws. Remove and replace water reservoir clip as necessary.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

CJ Berg

Membre depuis le 11/05/18

444 Réputation

4 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018 Membre de l'équipe UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018

UMASSD-GULBRANDSEN-F18S5G4

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 7

Total : 807